Redcon FT4X 2.4G Mini SBUS Receiver Compatible With FUTABA FASST

Brand Name: Redcon
Item Name: REDCON FT4X MINI SBUS Receiver
Usage: Spare Part for FUTABA FASST
Manufacturers ID: FT4X mini FASST S.BUS Receiver
Operating Current: 50mA max
Output Mode: S.BUS
Operating Voltage: 3.3 ~15V
Sensitivity: -100dBm
Size: 25*20*5MM (very small size)
Operating Temperature Range: -10℃~60℃
Compatibility: Futaba FASST radios (3PM,3PKS,3VCS,3GR,4PK(S),TM7,TM8, TM10, TM14,T6EX-2.4G,7C-2.4G,T8FG,T10CG and T12FG,T14SG )

* FT4X is a MINI FASST S.BUS Receiver. FT4X only 3g with hard case. this receiver can work with T14SG and all other Futaba FASST Transmitters. This Receiver designed for EPP, Race Drone, GLD, VTOL, coreless Drone .
* Small size, High Voltage, S.BUS Output
* Compatible with CC3D,NAZA32,F3 and other flight controller
* Compatible with FASST 2.4G Air systems both Surface system (C1 Mode) and (7CH/Multi mode)
* S.BUS Port is compatible with Futaba S.BUS Servo and other brand Servo.
* Failsafe function is supported, you could set failsafe before fly.

Binding is as easy as holding down the S/F button as you power up the receiver. LED flashes and turns a solid green when binding completed. Please make sure in binding process the transmitter is on.
Hint: If disabling failsafe on the transmitter side, FAST7 will use native failsafe position preset on the transmitter side. After binding, press the F/S button on Receiver, and LED flash quickly then turn to a solid green when Failsafe setting is completed.

If you use T14SG please make sure the transmitter always in FASST-MULT mode, if not binding between receiver and T14SG be cut off and crashed occurred. before binding process please make sure transmitter enter FASST-MULT mode.
型番 01-203